• 1
  • 2
  • 3
  • 4
  • 行业动态>
  • 进口电动蝶阀著名厂家-德国莱克LIK品牌-进口阀门 十大品牌厂家
    发布日期:2017-4-7


    德国莱LIK品牌,进口电动蝶阀属于电动阀门和电动调节阀中的一个品种。电动蝶阀连接方式主要有:法兰式和对夹式;电动蝶阀密封形式主要有:橡胶密封和金属密封。电动蝶阀通过电源信号来控制蝶阀的开关。该产品可用做管道系统的切断阀,控制阀和止回阀。附带手动控制装置,一旦出现电源故障,可以临时用手动操作,不至于影响使用。


    进口电动蝶阀应用领域

    广泛应用于食品、环保、轻工、石油、化工、水处理、市政工程、造纸、电力、水处理等行业的工业过程自动控制系统中。

      电动蝶阀适用于暖通与制冷行业,同时亦可用于工业领域、一般服务领域与水处理。


                                                 

    进口电动蝶阀优点

    1、电动蝶阀启闭方便迅速、省力、流体阻力小,可以经常操作。

    2、电动蝶阀结构简单,体积小,重量轻。

    3、电动蝶阀可以运送泥浆,在管道口积存液体最少。

    4、电动蝶阀低压下,可以实现良好的密封。

    5、电动蝶阀调节性能好。


    进口电动蝶阀缺点

    1、使用压力和工作温度范围小。

    2、密封性较差。

    安装与维护

    1、在安装时,阀瓣要停在关闭的位置上。

    2、开启位置应按蝶板的旋转角度来确定。

    3、带有旁通阀的蝶阀,开启前应先打开旁通阀。

    4、应按制造厂的安装说明书进行安装,重量大的蝶阀,应设置牢固的基础。


    进口电动蝶阀的工作原理:

    电动蝶阀的蝶板安装于管道的直径方向。在电动蝶阀阀体圆柱形通道内 ,圆盘形蝶板绕着轴线旋转,旋转角度为0°~90°之间,旋转到90°时 ,阀门则牌全开状态。

    电动蝶阀结构简单、体积小、重量轻,只由少数几个零件组成。而且只 需旋转90°即可快速启闭,操作简单,同时该阀门具有良好的流体控制 特性。电动蝶阀处于完全开启位置时,蝶板厚度是介质流经阀体时唯一 的阻力,因此通过该阀门所产生的压力降很小,故具有较好的流量控制 特性。电动蝶阀有弹密封和金属的密封两种密封型式。弹性密封阀门, 密封圈可以镶嵌在阀体上或附在蝶板周边。

    采用金属密封的阀门一般比弹性密封的阀门寿命长,但很难做到完全密 封。金属密封能适应较高的工作温度,弹性密封则具有受温度限制的缺 陷。

    如果要求电动蝶阀作为流量控制使用,主要的是正确选择阀门的尺寸和 类型。电动蝶阀的结构原理尤其适合制作大口径阀门。电动蝶阀不仅在 石油、煤气、化工、水处理等一般工业上得到广泛应用,而且还应用于 热电站的冷却水系统。

    常用的电动蝶阀有对夹式电动蝶阀和法兰式电动蝶阀两种。对夹式电动 蝶阀是用双头螺栓将阀门连接在两管道法兰之间,法兰式电动蝶阀是阀 门上带有法兰,用螺栓将阀门上两端法兰连接在管道法兰上。


    译文:

    Electric butterfly valve working principle and structure and applicable environmental analysis:

    Electric butterfly valve plate mounted on the pipe diameter direction. Electric butterfly valve in the cylindrical channel, disc-shaped disc around the axis of rotation, rotation angle of between 0 ° ~ 90 °, rotation to 90 °, the valve is fully open state licensing.

    Electric butterfly valve simple structure, small size, light weight, only by a few parts. And just rotate 90 ° to quickly open and close, easy to operate, while the fluid control valve has a good feature. Electric butterfly valve in the fully open position, the disc thickness is only when the medium flows through the body resistance, produced by the valve pressure drop is small, it has a better flow control characteristics. Electric Butterfly shells sealed and two metal seal type. Resilient seal valves, seals can be mounted on the body or attached to the disc periphery.

    Using a long metal seal valve life in general than the elastic sealing valve, but it is difficult to completely seal. Metal seals can adapt to higher operating temperature, flexible seal is affected by temperature limit of the defect.

    If you require the use of electric flow control valve as the main choice is the right size and type of valve. Electric Butterfly structural principle is particularly suitable for production of large diameter valves. Electric Butterfly has not only been widely used in the oil, gas, chemical, water treatment and other general industrial, but also used in thermal power plant cooling water system.

    Commonly used electric butterfly valve has two wafer type butterfly valve and flanged electric motor. Wafer electric butterfly valve with stud connection between two pipe flanges, flanged electric butterfly valve is a valve with a flange with bolt flanged ends of the valve on the pipe flange.

首页 | 公司简介 | 动态资讯 | 产品展示 | 阀门选型 | 工程案例 | 资料下载 | 客户反馈| 网站地图 | 联系我们

销售电话:020-32399500 图文传真:020-32398971  企业邮箱:leovalve@126.com
公司地址:广东广州黄埔区黄埔东路633  邮编:510700

网址:http://www.dghwvalve.com/

备案号:粤ICP备15070090号